Series 2000 Synthetic 20W-50 Racing Oil
The number one choice
for racers of all types of vehicles. Special synthetic base stock blend and
advanced additive package provides up to four times the wear protection of
other motor oils. Reduces friction for quicker engine response and increased
horsepower.
Buy
Now
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
1-Gallon Bottle
1-Gallon Bottles (case of 4)
30-Gallon Drum
55-Gallon Drum
Unbeatable Lubrication and Protection in High-Performance Gasoline
Engines
Engines in race cars, high-performance street cars, ATVs and
motorhomes face high temperatures, vigorous engine speeds or heavy loads, each
a potent stressor. AMSOIL Series 2000 20W-50 Synthetic Racing Oil offers
unmatched protection for engines facing tough operating conditions.
Unbeatable Wear Protection
AMSOIL Series 2000 20W-50 Synthetic Racing Oil is specially
formulated to carry the oil's wear reducing and heat transferring agents to the
engine's surfaces and hold them there. By positioning vital agents where they
are most needed, Series 2000 provides a degree of engine protection unavailable
with any other oil.
AMSOIL Series 2000 20W-50 Synthetic Racing Oil clings tenaciously
to engine surfaces, so it shields engines from start-up wear. Further enhancing
wear protection, AMSOIL Series 2000 20W-50 Synthetic Racing Oil's wax-free
lubricating basestocks assure rapid post-start-up lubrication.
AMSOIL Series 2000 20W-50 Synthetic Racing Oil contains powerful
corrosion preventives, detergents, dispersants and anti-foam agents to protect
engines from the harmful effects of water, acids, debris, deposit-forming
materials and air entrained oil.
Boosts Power, Speed and Efficiency
AMSOIL Series 2000 20W-50 Synthetic Racing Oil reduces friction so
effectively that virtually none of the engine's power is wasted on "drag." Its
extraordinary formulation gives Series 2000 a coefficient of friction lower
than that of other fine, race-formulated synthetic oils. With Series 2000,
vehicles accelerate fast, attain top speeds and use fuel efficiently.
Maintains Integrity in Demanding Conditions
AMSOIL Series 2000 20W-50 Synthetic Racing Oil maintains a constant
high level of performance over time because it resists the damage many oils
undergo in high temperature, intense shearing force conditions.
Advanced thermal stability allows AMSOIL Series 2000 20W-50
Synthetic Racing Oil to circulate readily, thus protecting hard-to-reach areas
that heat-damaged oils grow too thick to reach.
Superior shear stability allows AMSOIL Series 2000 20W-50 Synthetic
Racing Oil to provide a dependable pad of protection between parts even after
exposure to shearing forces that tear lesser oils apart.
APPLICATION
AMSOIL Series 2000 20W-50 Synthetic Racing Oil is recommended for
applications requiring the following specifications:
-
API SL, SH, SJ, CF
-
ACEA A2, A3, B2, B3
-
FORD ESR-M2C 179A
-
VW 501.01, 505.00
-
CHRYSLER MS-8809A
-
JASO VTW
-
JASO MOTORCYCLE MB
MIXING AMSOIL
AMSOIL Series 2000 20W-50 Synthetic Racing Oil may be mixed with
petroleum-based oils or with other synthetic oils. However, a mixture of AMSOIL
Series 2000 20W-50 Synthetic Racing Oil and another oil may offer a shorter
service life than pure AMSOIL Series 2000 20W-50 Synthetic Racing Oil does. The
AMSOIL Product Warranty does not apply to mixtures of AMSOIL Series 2000 20W-50
Synthetic Racing Oil and other oils.
SERVICE LIFE
Non-turbo-charged, non-race gasoline engines: Change the oil
at intervals up to three times longer than recommended by the manufacturer, or
one year, whichever comes first.
Turbo-charged, non-race gasoline engines: drain oil at
intervals up to three times longer than those recommended by the engine
manufacturer, or six months, whichever comes first.
Race engines: Specified by Owner Experience/Oil Analysis.
Marine four-cycle gasoline engines and infrequently used automotive
four-cycle gasoline engines: drain oil at intervals up to three times
longer than those recommended by the engine manufacturer, or one year,
whichever comes first.
Gasoline four-cycle fleet vehicle engines: drain oil at
intervals up to two times as long, or six months, as engine manufacturer's
recommendations if the findings of a conscientiously applied program of used
oil analysis indicate the oil remains serviceable.
AMSOIL Full-Flow Oil Filters should be changed at 12,500-mile or
six-month intervals, whichever comes first, in gasoline engines. If a Hastings
or other filter is used, filter should be changed at manufacturer
recommendations.
| AMSOIL synthetic motor
oils are fully compatible with conventional motor oil. For best results,
however, use AMSOIL Engine Flush,
then install AMSOIL synthetic motor oil.
For maximum engine protection, use an AMSOIL
Oil Filter and an AMSOIL Air
Filter.
Note: Most quick lube service centers will install these products upon
request or install them yourself.
|
|
TYPICAL PHYSICAL PROPERTIES
|
|
AMSOIL Series 2000 Synthetic 20W-50 Racing Oil (TRO)
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
18.3
|
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
128.1
|
|
Viscosity Index (ASTM D-2270)
|
160
|
|
Cold Crank Simulator Apparent Viscosity @ -10°C, cP (ASTM D 2602)
|
2343
|
|
High Temperature/High Shear @ 150°C and 1.0 X 106 s-1
, cP (ASTM D 4683)
|
5.1
|
|
Pour Point °C (°F) (ASTM D 97)
|
-36 (-33)
|
|
Flash Point °C (°F) (ASTM D 92)
|
234 (453)
|
|
Fire Point °C (°F) (ASTM D 92)
|
254 (489)
|
| Noack Volatility (DIN 51581) 250°C for 1 hour, % weight loss |
5.9
|
|
Four-Ball Wear Test (ASTM D 4172: 60kg, 150°C, 1800 rpm, 1 hr)
Scar diameter, mm
|
0.440
|
|
Four-Ball Wear Test (ASTM D 4172: 40kg, 150°C, 1800 rpm, 1 hr) Scar
diameter, mm
|
0.35
|
|
Total Base Number
|
>11.0
|